|
Turntable DC Servo Drive System
DC SERVO DRIVE
Torque: 100 lbs-in at specified RPM +/-.1 rpm Speed Correction and resolver feedback system (like aircraft motor) Digital Servo Drive with speed adjustment rpm programmed ramp up is 3 seconds to 33 rpm - 12 pulse/revolution tach output provides indication of motor speed with built in encoder for continuos speed control under any load. Maximum ADDITIONAL Weight on turntable Up to 50 lbs is safe and speed stable.
Amplifier Type:
PWM Digital regenerative amplifier with universal AC input voltage for systems where low speed performance and motion quality is crucial. Programmable for motor parameters, commutation functions, input output functions, gain parameters and feedback parameters. Provides the ultimate in consistency because digital application parameters are optimized. Communications capabilities can include RS-485/RS-232 or the CANopen network protocol.
DC Servo Speed Controller
Operates from 115 Volt AC line.
Filtered DC output results in cooler operation of the motor.
Unique Smart Reverse™ circuit allows remote control of motor direction.
NEMA 12 enclosure for environmental protection.
Dynamic braking programmed to 10 rpm per second braking (platter speed)
12 pulse/revolution tach output provides indication of motor speed.
Red LED indicates control shutdown due to a fault condition.
Speed can be adjusted manually any RPM 0 – 100 RPM or preset 33/45/78.
DIP switches set the current limit so that the same control model can drive any size motor.
Inherent closed loop system maintains a 1% maximum change in motor speed from 0-100% of rated load when operated at rated speed.
Toggle switch on enclosure indicates AC power on/off.
Lamp on enclosure indicates AC power on.
Fuse holders for line and motor fuses (fuses included) |
