TTCarbonFibre Mat 170 Gram (6 oz.) Light Weight for ALL Turntables
Material and Engineering Summary:
1.Single Layer Construction
2.Military Carbon Fibre, CNC Machined Single Piece Design
3.Dimensions: 11.45 inches diameter x .080 thick.
4.Weight: 170 Gram/6 oz.
How this mat sounds:
This mat is a very neutral mat with good dynamics revealing detailed and layered vocals/mid range. This mat works well when used on top of the existing mat or directly on the platter. It is extremely light and can be used on any turntable.
Replace or use on top of your factory rubber mat that robs the system of dynamics.
The TTCarbonFibre 170 Gram Light Weight is the ultimate design where light weight is critical, any turntable even the lightest suspended table can have a rock solid sound.
The ultimate, dynamic, musical with a sound stage that is deep, wide and layered. Vocals are both dynamic and smooth.
This mat is designed to replace the stock mat OR can be used on the Factory existing platter/mat.
This serious audiophile mat is designed to all but eliminate phase shifting, dampen unwanted resonance through the carbon fibre and maintain the rigidity required for deep powerful bass and delicate highs.
TTWeight Carbon donut (CNC machined) insert have a .005" thick epoxy gel-coat surface that results in a beautiful, deep, crystal clear finish without voids or pinholes. This added surface preserves the natural shape of the carbon fibres. Without this extra gel-coat, the carbon fibres will appear flattened or smashed, as seen in cheaper, lesser quality carbon fibre products. The laminated carbon donut provides the optimal vibration reducing mating surface.
The system works in the following ways:
Eliminates platter vibration using the world highest dampening yet rigid material
The platter is flat within .002 of an inch over the entire area and parallel within .0015
Replace the stock mat with the TTCarbonFibre 170 Gram Light and hear the music details, dynamics and soundstage come alive. The 2mm (.080 or just short of 3/32) Carbon Fibre CNC machined Mat providing the ultimate light weight coupling with the vinyl.
The inside is counter bored for the record label recess and to match our clamps and weights locating and clamping area.
