TTSuperClamp II (1.0 lb/458Grams) Brass Body, Alum
TTSuperClamp II (1.0 lb/458Grams) Brass Body, Aluminum Collet
Material and Engineering Summary:
1.Main body machined from billet brass and collet machined from 6061 aircraft grade aluminum
2.The body is grooved and filled with dampening media and GE silicone sealed
3.Finish: Diamond Machined, Hand Polished
4.Dimensions: 3.45 inch diameter by 1.5 inches height
5.Weight: (1.0 lb/458Grams)Brass Body/Internal Media/ and Aluminum Collet
6.Minimum spindle height 1/8
Designed for medium duty suspended tables and light to medium duty tables where a medium weight and a clamp is preferable, easy on the bearings. The sound is wonderfully clean and crisp, adding a controlled bass response, improved dynamics and dampens the spindle and bearing. These types of clamps may be used clamped on unclamped. The special body is filled with a special energy absorbing material.
Engineered to Perform
This is truly designed for the demanding audiophiles. The body is machined from billet Brass with internal grooves reducing mass (for lighter tables) ...weighing in at 405 grams. The high performance aircraft style soft collet is our own unique design; the collet and locking nut (top piece) are machined from a single part. The system uses two components vs. three. The older style of clamp uses mass produced machine collets, not very delicate, not designed for turntables and connected by a course threaded knob.
The body is machined from Billet Brass and is trepanned to reduce weight and maintain the dampening effect of the brass. The collet is a proprietary design gained from our many years of Aerospace and the use of hundreds of high precision collet systems down to .020 diameters. This collet is extremely well machined and provides rigid clamping of the TT spindle without the possibility of damaging the turntable spindle.
CNC Machined with a Multi Axis USA Built Hardinge 4 Axis Machine from solid USA purchased bar stock. Note: NADCAP Approved and Certificates of Compliance are available upon request
Note: All material is certified NADCAP Approved North American Supplied.
Certificates of Material Compliance (C of C's) are available upon request.
Benefits
·Universal Fit CLAMP except Linear Tracking Turntables
·Cleaner sound, improved dynamics and frequency response
·Lower Distortion Levels
·Machined flats on body and collet for ease of grip
Caution:DO NOT DISSASSEMBLE; the collet system will be permanently damaged
Material Certifications
CNC Machined with a Multi Axis USA Built Hardinge 4 Axis Machine from solid USA purchased bar stock. Note: NADCAP Approved and Certificates of Compliance are available upon request
Note: All material is certified NADCAP Approved North American Supplied.Certificates of Material Compliance (C of C's) are available upon request.
