This product is back-ordered; it is unavailable for ordering at this time please come back or continue shopping.
Prod. Code:
TTSuperWeight Stainless Version 1.8 lbs Internally
TTSuperWeight Stainless Version 1.8 lbs Internally Dampened
Our Best Center Clamp featuring our internally Tuned new DESIGN
Dimensions: 3.45 inch diameter by 1.5 inches height
Weight: 1.8lb (810 Grams) Stainless
Brass/Silica/Silicone
Polycarbonate
TTSuperWeight – 3 Materials, Multi Level Center Dampening Clamp System
The vinyl base provides the correct resonance and gentle coupling to the record label
Main Body, CNC Machined from Billet Stainless Steel
Extreme Center Weight dampening and coupling with more air and body
Main body is cored machined and a special brass media fills the core of the clamp housing to provide energy absorption with magic of brass.
The bottom polycarbonate base is press fit and laminated to the body with GE Aircraft Style Silicone
Hand polished, no maintenance stainless steel housing
Engineered for Maximum Performance and Versatility
This provides 4 levels of dampening. The ultimate center clamp and Polycarbonate base SAFE for ALL records including VINTAGE labels where any type of damage is a serious problem.
Layered vocals and details provide the sound common from a good tube amp, airy and bright yet easy to listen decreasing listening fatigue.
This medium weight turntable center weight is suitable for most unsuspended tables with reasonable platter drive systems. Noticeable bass improvement and smooth control of Bass with improved mid range and clean and clear high frequency response from the stylus. The outside diameter has milled flats for a distinctive looks and beautiful light reflection as the turntable spins your favourite album.
Benefits
Strong dynamics, punchy powerful sound and dynamics
Improved Stylus control resulting in improved frequency response
Lower Distortion Levels and reduces the noise floor
Machined all over and bored center holes with precision 32 Micro Inch Surface Finish will not damage spindle
Clears Spindles 1.0 depth
TTWeights can be mounted while turntable is turning
The Spindle bore is not drilled, it is CNC bored to +/-.001 diameter tolerance and is concentric to the outside diameter by .0005 or less.
The bottom has a concave Radius, .015 deep with a .250 or .375 on the clamps systems on the outside perimeter for correct seating on the LP perimeter. This increases the contact pressure vs. small diameter weights. The top has a beautiful arc that is a very attractive finely machined surface
Material Certifications
CNC Machined with a Multi Axis USA Built Hardinge 4 Axis Machine from solid USA purchased bar stock. Note: NADCAP Approved and Certificates of Compliance are available upon request
Note: All material is certified NADCAP Approved North American Supplied.
