TTHeavyWeight Record Clamp, Weight Style (3.1LB/14
TTHeavyWeight Record Clamp, Weight Style (3.1LB/1420 Grams) Brass
Material and Engineering Summary:
Designed for heavy duty turntables ONLY, this is a heavy device, small yet heavy
Provides a heavy mass dampening approach
Machined from 6 lb billet BRASS High Grade Bar stock
Dimensions: 3.45 inch diameter by 1.5 inches height
Weight: (3.1LB/1420 Grams)
Minimum spindle height 1/8
Engineered to Perform
This heavy turntable center weight is suitable for heavy duty turntables ONLY with strong platter drive systems. This bad boy provides massive Bass improvement and smooth accurate control and the warmth of Brass with defined mid range vocals rolling in to a clean and clear high frequency response. The outside diameter has milled flats for a distinctive look with beautiful light reflection as the turntable spins your favourite album.
These BRASS turntable stabilizers are designed to reduce sonic vibrations in the vinyl translating to better sound at the stylus. The sound improvement is dramatic; creating solid, deep and with rigidly smooth control. The mid range, vocals, and control provide a smooth linear response with dynamics that jump out of the speakers. Machined from Solid billet Brass, 16 Micro Inch Surface Finish. This Audiophile product is suitable for heavy duty unsuspended tables.
Benefits
·Heavy Duty unsuspended turntables, except Linear Tracking Turntables
·Unparalleled clean sound, improved dynamics, frequency response and soundstage
·Lower Distortion Levels
·Bored Center holes 32 Micro Inch Surface Finish will not damage spindle
·Clears Spindles 1.0 depth
·TTWeights can be mounted while turntable is turning
·The Spindle bore is not drilled, it is CNC bored to +/-.001 diameter tolerance and is concentric to the outside diameter by .0005 or less.
·The bottom has a concave Radius, .015 deep with a .250 or .375 on the clamps systems on the outside perimeter for correct seating on the LP perimeter. This increases the contact pressure vs. small diameter weights.
The top has a beautiful arc that is a very attractive finely machined surface
Material Certifications
CNC Machined with a Multi Axis USA Built Hardinge 4 Axis Machine from solid USA purchased bar stock. Note: NADCAP Approved and Certificates of Compliance are available upon request
Note: All material is certified NADCAP Approved North American Supplied.
