Home
Rim Drive Turntables
Why Rim Drive?
Turntable Isolation
Center Weights
Center Clamps
Turntable Mats
Outer Rings
Select by Turntable MFGS
Amp & CD Products
Audio Cables
Speaker SoundPoints
Clearance and Demos
Customer Pictures
Press and Reviews
Downloads & Support
Legal Terms and Condition
Contact Us
Our Dealers
TTSoundPoints Gallery
Kuzma
Audio Cables>
Bi-wired Jumper Cables- Spade


Price: $39.99
Prod. Code: Bi-wired Jumper Cables- Spade

Bi-wired Jumper Cables- Spade

The Testament Speaker Cable Jumpers are designed to replace the cheap brass jumpers that are typically provided with bi-wire ready loudspeakers.
 
The heart of this cable is 99.9999% pure copper manufactured using the Ohno Continuous Casting (PCOCC) supplied by Furukawa Electric of Japan. The wire has been cryogenically treated at our local heat-treating facility.
 
Each jumper consists of 2 conductors encased in a Teflon© dielectric and oriented in a twisted pair configuration to assist in EMI and RFI noise rejection. Four jumpers are provided for the positive and negative binding posts for a stereo pair of loudspeakers.
 
For banana plug terminated cables you have the following options:
- AudioQuest pure copper spades (on LF and HF ends)
 
For spade terminated cables you have the following options:
- Multi-Contact Low Mass Banana Plugs (on LF and HF ends)
- (recommended) Multi-Contact Low Mass Banana Plugs (on LF end) and AudioQuest pure copper spades (HF end)

Powered by webdesignplaza-site-builder.com webstore builder