·Designed as an upgrade to the a CU-180 MAT (Used price $700-900 USF)
·Layer Construction with Polycarbonate Copper and Carbon Fibre
·Copper disk CNC machined locates to turntable platter
·Military Carbon Fibre, CNC Machined to a doughnut shape special lamination process to adhere carbon fibre donut to copper mat.
·The MAT is undercut on the diameter for easy grip and removal by hand
·This platter is designed for the SP10 platter; this is a single piece design CNC Machined and designed to fit SP10 Platter recess - precisely
Dimensions: The copper Mat 11.60 inches/294.60mm diameter x 5 mm thick
Turntable Replacement Mat/Heavy Duty Box and foam for shipping
Designed for the ultimate coupling, the outer lead in edge of the LP clears the mat and the center is relieved to clear record labels and thus playing surface is coupled correctly
The spindle hole is bored to .290 inches/7.366 mm diameter
The edges are CNC chamfered, no sharp edges
Weight: 1860 Grams (1.86 KG/4.1 lbs)
Diamond Machined and sprayed with clear coat special anti oxidant
The sound is no nonsense, with extreme dynamics resulting from exceptional stability for the record and stylus. The TTMicroMat adds a mass of the 4.1 lbs (1.86 KG’s) to the platter for improved flywheel effect improving speed control. The solid Copper Mat provides an incredibility dense surface providing the optimal vibration reducing mating surface. The surface is diamond machined and the coating prevents record damage.
Benefits Summary
Eliminates platter vibration using a material with a high specific gravity improving tracking and stylus stability and dramatically improving the depth of sound
Copper provides beautiful full range and dynamic sound, very similar to Brass, the cartridge is reading the music grooves not the "vibrating record"
Adding High Density Mass to the platter improves the turntables ability to dampen vibration structural born vibration
The platter is flat within .002 of an inch over the entire area and parallel within .0015
The COPPER provides exceptional static grounding of the vinyl record dramatically reducing static and surface noise reduced electromagnetic interference (noise) to the sensitive stylus
Material Certifications
CNC Machined with a Multi Axis USA Built Hardinge 4 Axis Machine from solid USA purchased bar stock. Note: NADCAP Approved and Certificates of Compliance are available upon request
