TTMiddleWeight Combo Level and Record Weight (2.24 LB/1050 Grams) Brass
NEW! Our famous center weight now includes a high precision bubble level built in for a multipurpose weight and level. The center weight locates precisely on the spindle center line to provide the correct leveling location and this results in far more accurate leveling and stylus control.
Material and Engineering Summary:
1. Low Profile universal fit for all medium duty well built turntables
2. Includes built in level, precision installation for a solid fit and finish
3. Provides a mass dampening approach
4. Machined from 4 lb billet BRASS High Grade Bar stock
5. Dimensions: 3.45 inch diameter by 1.2 inches height
6. Weight: (2.24 LB/1050 Grams)
7. Minimum spindle height 1/8
8. Hand polished to a mirror finish.
Engineered to Perform
This relatively heavy turntable center weight is suitable for most unsuspended tables with reasonable platter drive systems. Noticeable bass improvement and smooth control of Bass with improved mid range and clean and clear high frequency response from the stylus. The outside diameter has milled flats for a distinctive look with beautiful light reflection as the turntable spins your favorite album.
Benefits
· Strong dynamics, punchy powerful sound and dynamics
· Improved Stylus control resulting in improved frequency response
· Lower Distortion Levels and reduces the noise floor
· Machined all over and bored center holes with precision 32 Micro Inch Surface Finish will not damage spindle
· Clears Spindles 1.0 depth
· TTWeights can be mounted while turntable is turning
· The Spindle bore is not drilled, it is CNC bored to +/-.001 diameter tolerance and is concentric to the outside diameter by .0005 or less.
· The bottom has a concave Radius, .015 deep with a .250 or .375 on the clamps systems on the outside perimeter for correct seating on the LP perimeter. This increases the contact pressure vs. small diameter weights. The top has a beautiful arc that is a very attractive finely machined surface
Material Certifications
CNC Machined with a Multi Axis USA Built Hardinge 4 Axis Machine from solid USA purchased bar stock. Note: NADCAP Approved and Certificates of Compliance are available upon request
Note: All material is certified NADCAP Approved North American Supplied
