This Aerospace Coating is applied to all COPPER Products
Air drying clear lacquer initially developed for stringent military standards for use in protecting non ferrous metals in arduous conditions.
This product is now available to the general market for protecting such metals as brass, aluminium and copper. Originally developed for protection of brass shell cases, this product is intended for interior or exterior use. With an excellent balance of hardness, adhesion and film toughness. Incralac has excellent resistance to UV light and resists yellowing and loss of gloss and clarity upon ageing.
APPROVALS / REFERENCES / SPECS
DEF STAN 80-24/2 NSN 8010-99-220-5827
PERFORMANCE
Excellent Salt Spray Performance
Gives good exterior weathering
APPLICATION
Can be applied by Brush or Spray. Use as supplied.
Apply as a multi-coat system to achieve the required dry film thickness
Air dry: 10 minutes: Hard dry: 1 hour
PHYSICAL PROPERTIES
Mixing Ratio Supplied ready for use.
Colour Clear
Thinner 18802 for cleaning
Gloss Level Gloss
Film Thickness 25 microns for maximum weathering and durability
Flash Point / Class / UN No ³0ºC < 21ºC / 3 / Paint UN1263
Pack Size 5 litre containers
Shelf Life 12 months
