Our Unique Platter Design
The musical interface is the physical contact with the platter and the coupling provided by our unique Outer Ring Stabilizer, no expense was spared to use the most stable and musical of materials for the platter. Machined from pure high grade US supplied NAVAL brass with carbon fibre inserts on the record face providing a very musical and extremely accurate and faithful reproduction of the record. NAVAL Brass is not affected by humidity or temperature (50F to 90F), is stable immediately after machining and over many years. This Platter will not change its shape of tolerances from internal stresses found in polycarbonate and aluminum platters.
Materials
Naval Brass Main Platter: machined from Billet BRASS block
Weight: Main Platter 71 LBS
Carbon Fiber Top Plate Insert
Interchangeable Stainless Steel Center Spindle, designed to .285 +/-.0005 diameter for accurate location of outer ring setting tool
- Screw type included
- Standard spindle included
Inertia: The massive moment of inertia combined with extremely torque and stable motor and controllers this turntable will eliminate any loss or variation of speed under any circumstances .
Dimensions: 2.0 thick x 13.1 profiled to 11.945 diameters providing a massive moment of inertia with a profile to 11.945 Diameter at the top platter surface.
Top Platter Designed for 1.3 KG Outer Ring
Specifications:
Weight: 71 lbs (32 Kg’s) (Platter Only)
Weight with Carbide Bearing and Sub Drive Platter Approximately 81 lbs. (36 Kg’s)
Weight with Bearing, Outer Ring and Center clamp: 85.3 (38.7 Kg’s
Click on the link below to continue on to the next page
|
